Duet 3 Main Board 6HC
An advanced, high power controller that features 6x 6.3A stepper drivers, 4 high current heaters, 6 fans and more
Product description
The Duet 3 Mainboard 6HC is a fully featured, high power controller for 3d printers, CNC machines and more. With 6 high current stepper drivers, 4 high current loads, 6 fans and more IO on board it can control many machines directly, with the ability to add much more capability through CAN-FD connected expansion boards.
The overall aim with the Duet 3 family is to allow for maximum flexibility of machine design through highly capable main boards, expansion boards, tool boards and custom expansion modules. This advanced hardware is enabled by our innovative RepRapFirmware 3 firmware running on the Duet 3 Mainboard and optionally DuetSoftwareFramework running on a single board computer.
FEATURES
| Processor | Powerful 32bit Atmel ATSAME70: ARM Cortex-M7 microcontroller running at up to 300MHz |
| Expansion | CAN-FD BUS for connecting multiple expansion boards and tools |
| Connectivity | Dedicated SPI Bus to Single Board Computer (SBC), or, alternatively, connect over an Ethernet network |
| Stepper Drivers |
6x TMC2160/5160 high-current drivers with the latest Trinamic features. Maximum motor current 6.3A peak per phase (4.45A RMS) | | High current outputs | 1x15A and 3x 5A PWM outputs for heated bed, extruders and similar | | Medium current outputs | 6 PWM controllable outputs for fans or similar. 3 of these support 4 wire fans including tacho reading | | IO | Nine I/O connectors with 3.3V output signal level and 30V-tolerant inputs | | Temperature Measurement | 4 thermistor/PT1000 inputs. Support for two temperature daughterboards for up to 4 PT100 or thermocouple sensors | | Supply Voltage | 12-48V | | Firmware | Runs RepRapFirmware 3.x - Supports all common machine geometries, easily configurable for your specific machine requirements |
Documentation
| Hardware Overview | GO TO DOCUMENTATION > |
| Getting started with Duet | GO TO DOCUMENTATION > |
RELATED PRODUCTS
CAN-FD connected expansion board for the Duet 3 Mainboard that provides connection to an external stepper driver and associated peripherals.
A high power Duet 3 expansion board that features 3x 6.3A stepper drivers, 3 high current heaters, 6 fans and more
An advanced, high power controller that features support for 6 external stepper motor drivers, along with similar outputs and IO as the Duet 3 Mainboard 6HC.
An advanced, mid range controller that features 5x 2A stepper drivers, 3 high current heaters, 4 fans and more
The Duet 3 Tool board: a CAN-FD connected expansion board for Duet 3, designed to provide complete control for a direct drive extruder.
The PanelDue is a colour touch screen controller for the Duet and other 3D-printing electronics that support it.
